Thursday, November 3, 2016

4) Mac & Jack's Amber 12/4/2016

To combat my off-flavors i've been having, I made some adjustments to my process. Making a yeast starter was the first major change. I needed to almost double the cell count from the smack pack. I purchased a new clear fermentor to better gauge fermentation activity, and I will be keggin this time to mitigate bottle-conditioning hassles.

Ken Nabors, the operations manager and head brewer for Mac and Jack’s says this beer is a “big, full-bodied amber beer” that does not readily fit into any traditional beer style. Ken was a bit shy when it came to giving out details about the ingredients and other brewing specifics, but he did say Mac and Jack’s has a citrus hop flavor up front, followed by a floral hoppy finish, which they achieve by dry-hopping in each individual keg. Ken also suggested using a yeast that produces a malty flavor in the beer. Clean yeasts are another feature of West Coast pale ales. Mac and Jack’s ages the beer for a few weeks before sending kegs out to the local pubs. They keep a close watch on the kegs they have out, making sure that pub patrons are always served this beer in its prime.



(5 gallons, extract with grains)

RECIPE: OG: 1.060 FG: 1.018 IBUs: 38 ABV: 5.5%

ACTUAL: OG: 1.051 FG: 1.014 IBUs: 38 ABV: 4.7%


Ingredients


7 lbs. Light malt extract syrup
.5lbs. Dry Light malt extract
1.0 lb. Munich malt
0.5 lb. crystal malt (80° L)
0.5 lb. Carapils (dextrin) malt
9.3 AAU Centennial hops (bittering) (1 oz. of 11.2% alpha acid)
6.2 AAU Cascade hops (aroma) (1 oz. of 8.1% alpha acid)
4.2 AAU Cascade hops (dry hop) (0.5 oz. of 8.1% alpha acid)


Wyeast 1098 (British Ale) yeast

Step by Step


Steep the crushed malts in three gallons of water at 150º F for 30 minutes. Remove the grains from the wort. Add the malt syrup and malt powder and bring to a boil. Add the Centennial (bittering) hops and Irish moss and boil for 60 minutes. Add the aroma hops (Cascade) for the last two minutes of the boil. When done boiling, strain out hops, add the wort to two gallons of cool water in a sanitary fermenter, and top off with cool water to 5.5 gallons. Cool the wort to 80º F, aerate the beer and pitch your yeast. Allow the beer to cool over the next few hours to 68–70º F and ferment for 10–14 days. Add the 0.5 oz. of Cascade pellets to keg suspended with dental floss.








1250ml of wort for 1.060 OG
First starter attempt is doing its thing. I used the Brewers Friend yeast starter calculator. The yeast is 14 days old, viability was 87 billion cells so I made a 1.25liter starter 2   days in advance for 200 billion cells 0.71M cells / mL / °P











Started siphoning wort from kettle to the fermentor to avoid oxygen exposure




Activity seen after 4 hrs, the pitch temp was 65 but I raised the temp to 70 to kick off fermentation, the temp was lowered back to ambient which is around 64. The SG came out low, mainly because I added too much water to the fermentor





About 16 hours into primary fermentation





3 days in, the krausen dropped, ramped up to 72 degrees and threw in some Cascades (about .75oz)






The first FG reading as 1.014 after 72 hours






Friday, October 7, 2016

3) Great Lakes Christmas Ale 10/7/2016


One of my favorite Winter Seasonal beers. I found this recipe on a forum and adapted it for extract brewing. It is a malty and warm feeling ale with notes of ginger and cinnamon.

Cost:      Yield:

Recipe OG: 1.073      FG: 1.018       ABV: 7.5%

Actual OG: 1.066      FG: 1.011       ABV: 7.22%


Extract Recipe

27 IBU
3 gal boil 

7.00 lb Light LME  
1.00 lb Light DME
1.00 lb Caramel/Crystal Malt - 40L
1.00 lb Wheat Malt
0.25 lb Special Roast
0.08 lb Roasted Barley

Steep grains in 1 gal for 45mins at 155F
Add Extract and bring to boil
Add hops loose this time

2oz Cascade              (60 min)
2 Cinnamon Stick     (60 min)
1oz Ginger                 (60 min)
1oz Hallertau           (15 min)
.5oz Hallertau           (5 min)
1.25lb Honey            (Flameout)

Wyeast 1056

Ferment two weeks 68F

For Bottling:
1 1/4 cup Dry Malt Extract Or 3/4 cup Corn sugar




Note:
Put the cinnamon and ginger in for the entire 60 minute boil and then remove them. Peel and cube the ginger and put it along with the cinnamon sticks in a hop sack and in the kettle for the entire boil. *Next time add more cinnamon to balance the sweetness of the honey



Friday, August 19, 2016

Willamette Hops

  Thought I would see how hard it is to grow my own hops. These Willamette Hops from the Poulsbo nursery produced very well for the first year. I want to add some Cascades and possible Columbus next spring.


Planted them in potting mix in about a 10 gallon bucket.







 Looks like they will be ready to harvest late August, the summer has been seasonably average with a slight heat spell closer to harvest.



Saturday, July 30, 2016

2) Miss American Pale 07/16/2016



Miss American Pale is reminiscent of Sierra Nevada and Mirror Pond Pale.

Cost: $31.84     Yield: 50 bottles (12oz)

Recipe OG: 1.050      FG 1.015       ABV 5%

Actual OG: 1.051      FG 1.008       ABV 5.6%










Extract Recipe

7 lbs Light Malt Extract
1 lb Crystal 20 L Malt
1 lb Munich Malt
1 1/2 oz Columbus Hops 25 HBUs(Boiling)   15% alpha
1/2 oz Columbus Hops(flavor: 30 min)
2 oz Cascade Hops(flavor: 2 min)  7.7% alpha
Wyeast American Ale (of course)

For Bottling:
1 1/4 cup Dry Malt Extract Or 3/4 cup Corn sugar

• Add cracked grains in a steeping bag to 2 gals of cold water and bring to a boil.
• When boiling starts, remove the grain and shut off the heat.
• Add malt extract and stir until fully dissovled.
• Return to heat and bring to a boil for 5 minutes, then add the boiling hops. (1 1/2 oz Columbus)
• Continue boiling for 30 mins then add 1/2 oz of Columbus hops.
• Continue boiling for 28 mins then add 2 oz of Cascade hops.
• Continue to boil for 2 mins.
• Fill your fermenter with 2 gals of cold water(40º).
• Remove and rinse(sparge) the hops with 1 quart of cold water into the fermenter.
• Add the wort to the fermenter with cold water to make 5 gals.
• Add yeast when the temp reaches 70º. Aerate the wort(shaking works well).
• Ferment at 65º to 70º for 1 week.
• Rack to a secondary fermenter. Let it age to clarity, then bottle or keg.

*Note: Used Wyeast 1056 instead of Safale. Also OG came out way low and forget to shake the wort after adding fresh water.


Tasted a sample bottle after only 6 days in the bottle


Its kinda dry up front and has a caramel finish, has nice citrus and malt notes. Good recipe!

Tuesday, February 2, 2016

1) Space Dust IPA


A clone at the increasingly popular seasonal IPA from Elysian Brewery out of Seattle. A well balanced, 7% IPA, with late and dry hop additions of Citra and Amarillo give this beer its bright citrus and grapefruit flavor and aroma.


Recipe: OG  1.065      FG 1.010    ABV 7%       IBU: 70       Cost: $65      Bottles:

Actual:  OG  1.063                FG    1.006           ABV: 7.5%  









Extract Recipe:

7 lbs Light Malt Extract
2 lbs Extra Light Dry Malt Extract
1/2 lb Crystal 20 L Malt
1/4 lb Carapils (Dextrin) Malt
1 oz Chinook Hops 12 HBUs 60 min
1 1/2 oz Citra Hops 10 min
1 1/2 oz Amarillo Hops 10 min
1 1/2 oz Citra Hops 1 min
1 1/2 oz Amarillo Hops 1 min
1 oz Citra Hops Dry Hop
1 oz Amarillo Hops Dry Hop
Wyeast 1056 American Ale Yeast or Safale US-05
1 tsp Amylase Enzyme

Instructions:

• Add cracked grains in a steeping bag to 2 gals of cold water and bring to a boil.
• When boiling starts, remove the grain and shut off the heat.
• Add malt extract, and stir until fully dissolved.
• Return to heat and bring to a boil for 5 minutes, then add the boiling hops. (1 oz Chinook)
• Continue boiling for 50 mins then add 1 1/2 oz of Citra and 1 1/2 oz Amarillo hops.
• Continue to boil for 9 mins then add 1 1/2 oz of Citra and 1 1/2 oz Amarillo hops.
• Continue to boil for 2 mins.
• Fill your fermenter with 2 gals of cold water(40º).
• Remove and rinse (sparge) the hops with 1 quart of cold water into the fermenter.
• Add the wort to the fermenter with cold water to make 5 gals.
• Add yeast and Amylase Enzyme when the temp reaches 70º. Aerate the wort(shaking works well).
• Ferment at 65º to 70º for 1 week.
• Rack to a secondary fermenter.
• Add 1 oz Citra hops and 1 oz Amarillo hops for dry hopping or if kegging, dry hop in the keg.
• Let it age 1 week, strain out the hops then bottle or keg.

For Bottling:
1 1/4 cup Dry Malt Extract Or 3/4 cup Corn sugar


Notes:
Steep grains at 155 degrees for 30 min
*Used Safale US-05 yeast and pitched directly on wort 



Brewing with Fresh Hops for the first time. 


Aquarium Heater for the water bath to keep the temp at 68 degrees.


Primary phase was ambient air temperature, about 63 degrees on average. When the bubbling rate started to slow and the fermentor temp dropped to 65, I moved it to the water bath to keep the temp in the 68 degree range. At 36hrs after pitching yeast the temp is holding steady at 70 degrees. Its bubbling at a rate of 1 every 3 seconds.



Added dry hops at 1 week



Ended up at 1.006 FG after two weeks 1 day at 70F